Postat 08 aprilie 2024
Trigger Walimex pro Delta Transceiver
50 lei
Persoana fizica
Stare: Utilizat
Livrare cu verificare
Descriere
Tranceiver in stare foarte buna, utilizat putin
4in1 radio remote trigger for system and studio flashes as well as remote camera trigger (with cable or wireless)
Suitable for Canon EOS cameras
Transmitting frequency: 433MHz
Reach up to 100 meters
very high synchronisation rate of 1/8000s
Remote trigger modes: triggering and time exposure
compatible with series walimex pro VE, VC and other studio flashes with IEC-320 male connector and sync socket with 3.5mm or 6.3mm jack (sync plug)
echnical specifications:
Channels 16
Transmitting frequency 433 MHz
Electric power supply for transmitter 3V (2xAA) Battery
Electric power supply for receiver 3V (2xAA) Battery
Sync socket Ø 6.35mm/Ø 3.5mm
Outdoor reach up to approx. 100m (open space)
Synchronisation rate 1/8000 sec.
Dimensions (L x W x H) 155x56.5x34.5mm (incl. antenna)
Total weight 84g
Wireless triggering over a distance of up to 100 meters
The 16-channel radio remote trigger from walimex pro allows you to trigger your flash or your camera. No matter whether with cable or wireless, the remote trigger can be flexibly used and has been specially designed for Canon EOS cameras with a reach of up to 100 meters. The receiver can be mounted to the studio flash via sync cord and can be triggered with the transmitter by hand or mounted to the flash shoe mount. When using a compact flash the device can simply be plugged on to the receiver and fastened to the tripod with the ¼ inch thread.
Flexible use
With a high synchronisation rate of 1/8000 seconds it is most suitable for extremely fast flashing sequences and the 16 possible channels also allow you to trigger several flashes. It can, however, also be used as a simple remote camera trigger and as a trigger for time exposures. The scope of delivery also contains two carrying straps for easy handling. These devices are transceivers, i.e. they can act as receivers or as transmitters.
4in1 radio remote trigger for system and studio flashes as well as remote camera trigger (with cable or wireless)
Suitable for Canon EOS cameras
Transmitting frequency: 433MHz
Reach up to 100 meters
very high synchronisation rate of 1/8000s
Remote trigger modes: triggering and time exposure
compatible with series walimex pro VE, VC and other studio flashes with IEC-320 male connector and sync socket with 3.5mm or 6.3mm jack (sync plug)
echnical specifications:
Channels 16
Transmitting frequency 433 MHz
Electric power supply for transmitter 3V (2xAA) Battery
Electric power supply for receiver 3V (2xAA) Battery
Sync socket Ø 6.35mm/Ø 3.5mm
Outdoor reach up to approx. 100m (open space)
Synchronisation rate 1/8000 sec.
Dimensions (L x W x H) 155x56.5x34.5mm (incl. antenna)
Total weight 84g
Wireless triggering over a distance of up to 100 meters
The 16-channel radio remote trigger from walimex pro allows you to trigger your flash or your camera. No matter whether with cable or wireless, the remote trigger can be flexibly used and has been specially designed for Canon EOS cameras with a reach of up to 100 meters. The receiver can be mounted to the studio flash via sync cord and can be triggered with the transmitter by hand or mounted to the flash shoe mount. When using a compact flash the device can simply be plugged on to the receiver and fastened to the tripod with the ¼ inch thread.
Flexible use
With a high synchronisation rate of 1/8000 seconds it is most suitable for extremely fast flashing sequences and the 16 possible channels also allow you to trigger several flashes. It can, however, also be used as a simple remote camera trigger and as a trigger for time exposures. The scope of delivery also contains two carrying straps for easy handling. These devices are transceivers, i.e. they can act as receivers or as transmitters.
ID: 211728921
Contactează vânzătorul
xxx xxx xxx