Specifications
Audio section
Power amplifier
Rated out­put:
Front:
150 W + 150 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
190 W + 190 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Cen­ter:
150 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
190 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Sur­round:
150 W + 150 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
190 W + 190 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Sur­round back / Height1 / Height2 / Height3 / Height4/Front wide:
150 W + 150 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.)
190 W + 190 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Dy­namic power:
170 W x 2-chan­nel (8 Ω/ohms)
280 W x 2-chan­nel (4 Ω/ohms)
Out­put con­nec­tors:
4 – 16 Ω/ohms
Analog
Input sen­si­tiv­ity:
200 mV
Fre­quency re­sponse:
10 Hz – 100 kHz — +1, –3 dB (Di­rect mode)
S/N:
102 dB (IHF–A weighted, Di­rect mode)
Dis­tor­tion:
0.005 % (20 Hz – 20 kHz) (Di­rect mode)
Rated out­put:
1.2 V
Digital
D/A out­put:
Rated out­put — 2 V (at 0 dB play­back)
Total har­monic dis­tor­tion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dy­namic range — 100 dB
Dig­i­tal input:
For­mat — Dig­i­tal audio in­ter­face
Phono equalizer
Input sen­si­tiv­ity:
2.5 mV
RIAA de­vi­a­tion:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (IHF-A)
Dis­tor­tion fac­tor:
0.03 % (1 kHz, 3 V)
Video section
Standard video connectors
Input/out­put level and im­ped­ance:
1 Vp-p, 75 Ω/ohms
Fre­quency re­sponse:
5 Hz – 10 MHz — 0, –3 dB
Color component video connector
Input/out­put level and im­ped­ance:
Y sig­nal — 1 Vp-p, 75 Ω/ohms
PB / CB sig­nal — 0.7 Vp-p, 75 Ω/ohms
PR / CR sig­nal — 0.7 Vp-p, 75 Ω/ohms
Fre­quency re­sponse:
5 Hz – 60 MHz — 0, –3 dB
Tuner section
[FM]
[AM]

(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W)
Re­cep­tion fre­quency range:
87.5 MHz – 107.9 MHz
520 kHz – 1710 kHz
Ef­fec­tive sen­si­tiv­ity:
1.2 μV (12.8 dBf)
18 μV
50 dB sen­si­tiv­ity:
MONO ― 2.8 μV (20.2 dBf)
S/N ratio:
MONO ― 70 dB (IHF–A weighted, Di­rect mode)
STEREO ― 67 dB (IHF–A weighted, Di­rect mode)
Dis­tor­tion:
MONO ― 0.7 % (1 kHz)
STEREO ― 1.0 % (1 kHz)
Wireless LAN section
Net­work type (wire­less LAN stan­dard):
Con­form­ing to IEEE 802.11a/b/g/n
(Wi-Fi® com­pli­ant) ∗1
Se­cu­rity:
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Used fre­quency range:
2.4 GHz, 5 GHz
The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Bluetooth section
Com­mu­ni­ca­tions sys­tem:
Blue­tooth Spec­i­fi­ca­tion Ver­sion 3.0 + EDR (En­hanced Data Rate)
Trans­mis­sion power:
Blue­tooth Spec­i­fi­ca­tion Power Class 1
Max­i­mum com­mu­ni­ca­tion range:
Ap­prox. 98.4 ft/30 m in line of sight ∗2
Used fre­quency range:
2.4 GHz
Mod­u­la­tion scheme:
FHSS (Fre­quency-Hop­ping Spread Spec­trum)
Sup­ported pro­files:
A2DP (Ad­vanced Audio Dis­tri­b­u­tion Pro­file) 1.2
AVRCP (Audio Video Re­mote Con­trol Pro­file) 1.5
Cor­re­spond­ing codec:
SBC
Trans­mis­sion range (A2DP):
20 Hz – 20,000 Hz
The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
General
Power sup­ply:
AC 120 V, 60 Hz
Power con­sump­tion:
900 W
Power con­sump­tion in standby mode:
0.1 W ∗
Power con­sump­tion in CEC standby mode:
0.5 W
Flower Mark When “Network Control” in the menu is set to “Off In Standby” and “HDMI Pass Through” is set to “Off”.
For purposes of improvement, specifications and design are subject to change without notice.

Transformator de 1kw inclus plus accesorii. Doar cu avans se trimite în toată țară. Receiverul este folosit puțin de tot, ca nou.