Processor
Samsung Exynos5 Octa ARM Cortex™-A15 Quad 2Ghz and Cortex™-A7 Quad 1.3GHz
CPUs
Memory 2Gbyte LPDDR3 RAM at 933MHz (14.9GB/s memory bandwidth) PoP stacked
3D Accelerator Mali-T628 MP6(OpenGL ES 3.0/2.0/1.1 and OpenCL 1.1 Full profile)
Video supports 1080p via HDMI cable(H.264+AAC based MP4 container format)
Video Out Standard Type A HDMI connector
Audio Instead of On-board Audio codec, There is I2S Expansion Port(CON11)
USB3.0 Host SuperSpeed USB standard A type connector x 2 port, Max Load: total 2Amp for two USB 3.0 host ports
USB2.0 Host High Speed standard A type connector x 1 ports, Max Load: 500mA/port
Display HDMI monitor
Storage (Option) MicroSD Card Slot, eMMC module socket : eMMC 5.0 HS4000 Flash Storage
Gigabit Ethernet LAN 10/100/1000Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support)
Serial console port Connecting to a PC gives access to the Linux console.
You can see the log of the boot, or to log in to the C1 to change the video or network settings.
Note that this serial UART uses a 1.8 volt interface. We recommend the USB-UART module kit from Hardkernel.
Molex 5268-04a(2.5mm pitch) is mounted on the PCB. Its mate is Molex 50-37-5043 Wire-to-Board Crimp Housing.
RTC (Real Time Clock) backup battery connector If you want to add a RTC functions for logging or keeping time when offline, just connect a Lithium coin backup battery (CR2032 or equivalent).
All of the RTC circuits are included on the ODROID-XU4 by default.
Molex 53398-0271 1.25mm pitch Header, Surface Mount, Vertical type (Mate with Molex 51021-0200)
WiFi (Option) USB WIFI Modules
HDD/SSD SATA interface (Optional) SuperSpeed USB (USB 3.0) to Serial ATA3 adapter for 2.5“/3.5” HDD and SSD storage
Power (Option) 5V 4A Power
Case(Option) Mechanical case & cooler (90 x 59 x 28 mm approx. )
PCB Size 83 x 58 x 20 mm approx.