Universal Device Server LANTRONIX UDS 1100 nou, nefolosit, a fost alimentat doar pentru verificare funcționare.
Se poate alimenta de la orice sursa DC 9-30V sau AC 9-24V.

Serial Interface
Interface: Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
Connectors: 1 DB25F DCE serial port
Data Rates: Software-selectable baud rate from 300 to 230 KBaud

Serial Line Format
Characters: 7 or 8 data bits
Parity: odd, even, none
Stop Bits: 1 or 2 Control

Flow Control
Signals: CTS/RTS (Hardware)
Flow Control: XON/XOFF (Software)

Network Interface
Interface: 10Base-T/100Base-TX Ethernet port
Software selectable Ethernet speed 10/100/Auto
Software selectable Half/Full/Auto duplex
Connectors: RJ45
Standards: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, and Telnet, TFTP

Indicators (LED)
Power, 10/100 Link/Activity (green)
100/100 Link/Activity (green)
Diagnostics (red)
Status (green)

Processor
CPU: Lantronix DSTNI-EX 48 MHz clock
Memory: 256 KB zero wait state SRAM, 2 MB Flash

Management
Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet login, HTTP

Power
9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum consumption)
9-30 VDC on DB25F serial interface

Environmental
Operating: 0° to 60° C (32° to 140°F)
Storage: -40° to 85° C (-40° to 185° F)

Agency Approvals
UL, CSA, FCC, CE, TUV, CTick, VCC, UL 864

Included Software
Windows® 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector software and related utilities

Packaging
Material: Metal enclosure with integrated wall mounts; optional 35 mm DIN-rail mount available
Dimensions (LxWxH): 9.0 x 6.4 x 2.3 cm (3.5 x 2.5 x 0.9 in)
Weight: 0.20 kg (0.45 lb)
IP Rating: 30

Isolation
Designed with protection against transients and ESD for use under harsh environments.
Serial Port: 15 kV ESD protection on RS232 and RS422/485 transceivers
Power Input: Up to non-repeated 600 W 10/100 usec pulse protection against transient over voltages
Ethernet Port: 1500 VAC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection