Se poate ridica local (Bucuresti) si/sau se livreaza prin curier / posta.

Kit-ul arata ca in poza si e format din:
- Modul LCD + Modul Comanda forta + cablu comunicatie
- Pedala contact
- Cablu cupru sudura puncte 25mm2
(vezi toate pozele)

video construire pas cu pas pe youtube: youtube.com/watch?v=6HfRCRTtVRk
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- Modul de sudura in puncte cu dublu impuls programabil
- Display afisare parametri
- Curentul maxim suportat este de 100A
- Timp programabil
- Poate suda platbanda grosimi maxime de 0.20mm
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Cablu pentru aparat sudura in pucte.
- Lungime: aprox 60cm
- Material: Cupru
- Sectiune: 25mm2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Pedala cu revenire actionare contact electric 10A max 250VAC, uz universal (industrial, casnic . . . etc)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Nota: Pentru a fi folosit aveti nevoie de un transformator de putere minim 500W (vezi cuptor cu microunde) si un transformator mic de putere 9-12V-AC (alternativ) pentru detectarea curentului trecere prin zero spre a actiona SCR-ul.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

ATENTIE nu ofer garantie daca nu respectati aceste recomandari !

Transformatorul cel mic de alimentare trebuie sa fie de 9-12V - ALTERNATIV !!! Nu continuu.

Inainte de folosire se seteaza tensiunea de lucru 230V AC astfel: se tine apasat pe potentiometru digital, se face power on, se seteza tensiunea corecta de obicei 230V, dupa care dupa mai multe click-uri se iese din meniu

Si cel mai importat modulul nu masoara si nu stie ce curent are pe iesire chiar daca pe ecran e setat un curent anume, software in spate in functie de cum e setat curentul 30A -- 65A -- 85A ... si timpii T1 si T2 el stie (relativ) cati jouli reprezinta accea sudura. Timpii T1 si T2 reprezinta numarul de cicli, iar un ciclu are 20ms, exact cat are o sinusoida si modulul efectiv numara numarul de sinusoide (trecerile prin zero) rezultand timpul efectiv de sudura.

Se poate creste curentul la iesire, chiar daca ati setat maxim, pur si simplu adaugand un numar de spire in plus sau folosind fire mult mai groase sau folositi traf toroidal mult mai mare. Efectiv in final puteti ajunge la curent mare in unitatea de timp marind timpii de sudura.

In final modulul de sudura face ceea ce spune ca face.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Description:

The spot welder control module is developed for DIY or simple battery welder. It is mainly used for single battery or battery group nickel plated sheet welding, such as 18650 lithium battery nickel plating 0.15 and 0.2mm steel sheet, 500W transformer can be welded directly. It is intended to weld other battery materials and different thickness, such as polymer battery electrode without nickel plating, must be combined with sufficient power transformer to weld. This module includes main board and display board 100A bidirectional silicon control rectifier (SCR), does not include welding transformers, welding pen and other matching tools.

Features:
- Can be set to save the last operation, the module double pulse trigger, turn off any set of trigger time, you can change double pulse to single pulse trigger.

- The main board and the display panel are separated, and the outer casing can be flexibly assembled.

- Multi-group data 12864 visual display, intuitive operation, convenient, single encoder parameter adjustment can make the operation simple and fast.

- With grid voltage compensation, the output of compensation can be automatically adjusted according to the change of power supply, and the electric voltage of about 1 second can be displayed when triggered, so that the effective heat of welding is consistent with the welding parameters, and the welding spot is uniform.

- With 0-9999 welding counting function, with 5 groups of sample storage parameters, can be stored even the electricity power is off; the number of welding could be seen just by a glance.

- Time input 0-99 cycle (1 cycle is 20ms, for example, the adjustment value is 50, which is the welding time 1 second.), the stop time between 2 welding is 0-99 cycles (1 cycle is 20ms, such as interval value 50, It is the interval of 1 second.) adjustable. Welding strength 30%-99% is adjustable.

- The module can isolate the strong and weak electricity by optical coupling, and design a reliable circuit for zero-crossing detection and voltage detection to ensure the accurate phase shift of silicon control rectifier (SCR), which can be compatible with 100A bidirectional silicon control rectifier (SCR).

- 9-12 V AC power input (using AC transformers, other such as DC, can cause zero-crossing detection failure, cannot trigger.).

- The power input and external trigger adopt convenient and quick welding free terminal, the external trigger can be diversified, such as normal switch, foot switch, external signal source input, etc., the software has anti-lock state, triggering to the end of welding, for one round. For example, the pedal switch has been trampled all the time, can only trigger one round.

Scope of Use:
1. DIY or simple battery welder development welding.
2. Welding of a single battery or battery pack.

Specifications:
Current: 100A
Display: 12864 LCD Display
Display Board Size: 85 * 45mm
Main Board Size: 85 * 45mm
Package Size: 10 * 9 * 2cm
Package Weight: 68-82g