Huawei NetEngine AR600 Series AR617VW-LTE4EA LTE WiFi Router Dual-Sim

Produsul este nou, desfacut pentru proba.
Se pot conecta alte modele de antene LTE pentru cresterea semnalului in cazul in care semnalul in zona unde locuiti este slab

Se poate folosi cu 2 SIM-uri, caz in care primul sim este cel principal intotdeauna.
Daca se foloseste un singur sim, se va instala in slotul 1

AR617VW, 1*GE COMBO WAN, 4*GE LAN, 1*VDSL2, 2*FXS, 1*USB 2.0, Wi-Fi 2.4G+5G
Conectivity: 3G, 4G, Ethernet (RJ-45) Hub/Switch, Wired-Ethernet (RJ-45)

Forwarding Performance(LAN - > WAN + WAN - > LAN, NAT + ACL + QoS, IMIX) 300 Mbit/s
IPsec Performance (IMIX) 200 Mbit/s

Supported rates:
LTE FDD (ME909s-120p and ME909s-120p V2): uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s
LTE FDD (EC25-E): uplink rate of 40 Mbit/s and downlink rate of 100 Mbit/s
LTE TDD (ME909s-120p and ME909s-120p V2): uplink rate of 35 Mbit/s and downlink rate of 130 Mbit/s
LTE TDD (EC25-E): uplink rate of 40 Mbit/s and downlink rate of 100 Mbit/s
DC-HSPA+: uplink rate of 5.76 Mbit/s and downlink rate of 42 Mbit/s
HSPA+: uplink rate of 5.76 Mbit/s and downlink rate of 21.6 Mbit/s
WCDMA PS: uplink rate of 384 kbit/s and downlink rate of 384 kbit/s
WCDMA CS: uplink rate of 64 kbit/s and downlink rate of 64 kbit/s
EDGE: uplink rate of 236.8 kbit/s and downlink rate of 236.8 kbit/s
GPRS: uplink rate of 85.6 kbit/s and downlink rate of 85.6 kbit/s
GSM: uplink rate of 9.6 kbit/s and downlink rate of 14.4 kbit/s

2x Antene Wifi:
Standards compliance: 802.11a/b/g/n/ac
Supported frequency bands: 2.4 GHz and 5 GHz
Supported rate: 866 Mbit/s
MIMO mode (Tx x Rx): 2 x 2
Gain: 2.5 dBi/3.0 dBi

Interfata WAN duala - Port RJ45 si/sau port SFP

4xRJ45 LAN 1Gbps

Port consola RJ45
Standards compliance: RS232
Working mode: duplex Universal Asynchronous Receiver/Transmitter (UART)
Data equipment type: Data Circuit-terminating Equipment (DCE)

WAN interface: VDSL interface
T1.413 ANSI ADSL DMT issue 2 compliance
ADSL Annex A ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)
ADSL Annex M G.992.3 (ADSL2) and G.992.5 (ADSL2+)
ITU G.993.2 (VDSL2) and supported profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a, and 35b
VDSL2 Vectoring (G993.5), only supporting over POTS vectoring