Video demo: youtu.be/WU4nICbXPpU

De vanzare un rar exemplar japonez din liga pickup-urilor High-End de la finele anilor 70 - inceputul anilor 80, produs de DIATONE / MITSUBISHI, grup cunoscut pentru boxele cu un sound inconfundabil dar si pentru cablurile sale din cupru exceptionale, utilizate de marci precum Oyaide sau Acrolink/Acrotec, etc

Pret de vanzare la lansare 128.000 yeni mult mai mult decat un Kenwood KP-9010/KP-1100 sau un Victor QL-Y66F sau Denon DP-59L, e drept acestea fiind lansate cativa ani mai tarziu.
Unul din motive fiind nivelul de inovatie pentru anii 70 precum si atentia extraordinara la detalii precum cablarea exclusiv cu conductori de argint pur a bratului sau detectia automata a dimensiunii discului sau decuplarea sunetului automat la ridicarea acului de pe disc pana la reluarea redarii (eliminarea zgomotului de fond), etc

Arata, suna si functioneaza foarte bine, nu sunt zgarieturi sau urme vizibile de utilizare, colturile sunt intacte, capacul acrilic este transparent si arata ca nou, pentru un aparat produs la finalul anilor 1978-1979 se prezinta absolut exceptiona, fiind revizionat recent anterior importului din Japonial!
Toate functiile de pe panou Start/Stop, 33/45rpm, de miscare a bratului manual sau automatic, etc functioneaza ca in manual.

Versiunea pentru piata JP / 100V, cu transformator de calitate 230-100V inclus in pret astfel incat sa il puteti utiliza fara probleme la priza locala de 230V.
Ocazie rara pentru pasionatii de pickupuri vintage high-end

Pretul nu include doza Grace F-8 cu headshell FR din poze, a fost fotografiata doar cu scop demonstrativ. Optional se poate achizitiona si cu doza/headshell mentionate +700 RON.

audio-database. com/MITSUBISHI-DIATONE/player/dp-ec1mkii-e.html

An EC (electronically controlled) full auto player released as a successor to the DP-EC1.
The counter weight of the tone arm has a built-in anti-resonance filter. This anti-resonance mechanism reduces resonance in the 30 Hz to 80 Hz range and improves resolution in the low frequency range.
In addition, stainless steel pipe with high rigidity is adopted for the pipe arm instead of the conventional aluminum pipe, and it is combined with the counter weight with the damper built-in, and the deflection of the pipe part is almost eliminated.
A force is applied to the tone arm in the direction of twisting or pulling the pipe. If the pivot is loose at this time, these forces will be applied to the needle tip and the sound quality will deteriorate. To prevent this, the span of the pivot is expanded, and a full-scale radial ball bearing is used for water plain bearing. This eliminates the looseness of the pipe and suppresses resonance.
The tone arm is driven by two separate motors, one for horizontal direction and the other for vertical direction.
All the conductors in the arm and the head shell are made of pure silver wire with special coating, which reduces DC resistance and improves the sound rise to improve the sound quality in the mid and high range.
The automatic record size detection mechanism uses an optical system to detect the record size without touching the record.
The principle of this automatic record size detection mechanism is that a reflector emits light from obliquely above a record and guides the light to a sensor corresponding to each record size. The light to the sensor is blocked or emitted depending on the record size, and its output changes depending on the record size. The output from the sensor is then sent to a logic circuit that determines the size of the record. Then, the needle down position, performance end position, and rotation speed of the automatic performance are determined automatically.
In addition, with DP-EC1mkII, it is possible to finely adjust the position of the needle effect on the record board by pressing the button.
The DP-EC1mkII is designed to operate without contact at all times while detecting the state of the arm lifter (up / down) and the horizontal position of the arm, so that it can operate automatically from any position.
Manual operation is possible without switching between Auto and Manual except when the arm is moved by Auto operation.
Equipped with a quick response mechanism, even when the arm is moving up or down in automatic operation, if you instruct a new operation with the button, you can immediately move to the next operation.
A quartz PLL system is used to control the rotation of the turntable. In this system, the rotation speed of the motor is controlled by a high-precision reference signal from a crystal oscillator. The motor also uses a 4-phase 12-pole quartz PLL / DC servo motor with a starting torque of 1.2 kg ・ cm.
The turntable has an outer diameter of 333 mm, a weight of 1.8 kg, and an inertial mass of 353g-cmS.2Turntable is adopted.
With an emphasis on record adhesion, it uses a turntable sheet designed slightly above the mortar. As the material of this sheet, it uses NBR flexible sheet which was selected after consideration of hardness and specific gravity. It has a thickness of 5 mm, specific gravity of 1.5, and hardness of 45.
The electronic flash unit uses the quartz oscillation frequency to generate a signal with a pulse width as short as 1/1000 second and drives the green LE.
By gathering all operation buttons on the front of the cabinet, it can be operated even with the dust cover closed.
The cabinet consists of a die-cast player board combined with a wooden laminate board, and the bottom lid is made of a heavy resinamic material.
Equipped with a muting mechanism to cut noise.
Equipped with a needle tip protection mechanism, the tone arm does not come down even if you lead in when there is no record on the turntable.

Type Electronically controlled full auto player

Drive system Direct drive system
Motor 4-Phase 12-Pole Quartz PLL / DC Servo Motor
Turntable 333 mm Aluminum Alloy Die-cast, 1.8 kg
Inertial mass 353g-cm / S2
Number of revolutions 33 1/3, 45 rpm
Rotational speed switching system Electronic Type (Manual Switching at Irregular Rotation Number Record)
Wow flutter 0.025% or less (WRMS)
Signal-to-noise ratio 80 dB or more (DIN-B)
Tone Arm Section
Type Static Balance Type / Universal S-shaped Pipe Arm
Total Length 320mm
Effective length 227mm
Overhang 14mm
Tracking error angle + 2.9 °, -1.5 °
Offset Angle 22 °
Needle pressure adjustment Direct Reading Type 0 ~ 3g (0.1g Step)
Head shell Magnesium Die-cast, 6.2 kg
Cartridge mounting weight range 11g ~ 16.5g
16g ~ 21.5g (when sub-weight is used)

Power 100 VAC, 50Hz/60Hz
Power consumption 10W
External dimensions Width 470x Height 150x Depth 395 mm
Weight 13.5kg