De vanzare un amplificator rar si cum nu o sa se mai fabrice.

Alpine MRV 1000 V12.
Detin manualul original tehnic.
Amplificatorul are 2 iesiri, optiuni de punte (bridge).
Sigurante de 30Ax2
14.4V alimentare

Ceea ce inseamna ca duce mult peste ce indica manualul (P=U*I, P=60A*14.4V=> P=864W)
Real are undeva la 400W pe canal.

De precizat ca am mai multe (6) pe care le-am strans pentru un proiect pe care nu am mai apucat sa-l termin.
Stare buna de functionare.
Pretul este pentru un singur amplificator.
Original specs:

Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20 kHz)
Per Channel into 4 ohms - 100W - 0.08% THD
Per Channel into 2 ohms - 200W - 0.3% THD
Bridged into 4 ohms - 400W - 0.3% THD

Dynamic Power (at 14.4V, 20 Hz to 20 kHz)
Per Channel into 4 ohms - 150W - 0.08% THD
Per Channel into 2 ohms - 300W - 0.3% THD
Bridged into 4 ohms - 600W - 0.3% THD

Frequency Response - 8 Hz to 60 kHz - (+0, -1 dB)
Signal-to-Noise Ratio - 105 dBA - (referenced to rated power)
Slew factor - Greater than 5
Input Sensitivity (for rated power ouput) - 200mV to 4.0V (1.0V a center detent)
Input Impedance - 10k ohms
Speaker Impedance - 4 or 2 ohms (Stereo), 4 ohms (Bridged)
Active Dividing Network Frequency and Slope - 50 to 200 Hz, 12 dB per octave
Power Requirement - 11 - 16VDC Negative Ground
Dimensions (W x H x D) - 240mm x 53mm x 330mm (9-7/16" x 2-16" x 13")

Weight - 4.2 kg (9lbs. 4 oz)

THIS IS WHAT A COUPLE OTHER MRV-1000's WERE ACTUALLY TESTED AT.

Actual Tested RMS Continuous Power (at 12.0V, 20 Hz to 20 kHz)
4 ohms stereo - 152.5W x2 - 0.08% THD
2 ohms stereo - 305W x2 - 0.3% THD
4 ohms bridged - 610W x1 - 0.3% THD

Actual Tested RMS Continuous Power (at 14.4V, 20 Hz to 20 kHz)
4 ohms stereo - 228.75W x2 - 0.08% THD
2 ohms stereo - 457.5W x2 - 0.3% THD
4 ohms bridged - 915W x1 - 0.3% THD

Actual Tested RMS Continuous Power (at 12.0V, 20 Hz to 20 kHz)
4 ohms stereo - 167W x2 - 0.08% THD
2 ohms stereo - 334W x2 - 0.3% THD
4 ohms bridged - 668W x1 - 0.3% THD

Actual Tested RMS Continuous Power (at 14.4V, 20 Hz to 20 kHz)
4 ohms stereo - 250.5W x2 - 0.08% THD
2 ohms stereo - 501W x2 - 0.3% THD
4 ohms bridged - 1002W x1 - 0.3% THD