Sansui au-607 in stare foarte buna atat functional cat si estetic.

Effective output (both channel operation) 65W + 65W (8 ohm, 20 hz to 20 khz, 0.03% THD)
65W + 65W (8 ohm, 1 khz, 0.003% THD)
Total harmonic distortion factor 0.03% or Less (20 Hz to 20 kHz, Effective Output)
Intermodulation distortion factor (70 hz : 7 khz = 4 : 1) Not more than 0.03%
Output Bandwidth (IHF, both channel operation, THD 0.03%) 5 Hz ~ 50 kHz (8 Ω)
Damping factor (IHF, both channel operation, 1 kHz) 60 (8 Ω)
Frequency Response (1W) DC ~ 200 khz + 0 -3dB
Input Sensitivity / Impedance (1 kHz) 1V/47k Ω
Signal-to-noise ratio (IHF, A-network, short circuit) 115 dB or more
Channel Separation (1 kHz, Input Short) 75 dB or more
Preamplifier Section
Input Sensitivity / Impedance (1 kHz) Phono1, 2 : 2.5mV/47k Ω
Aux, Tuner, Tape play1, 2 : 150mV/47k Ω
Phono maximum allowable input (1 kHz, THD 0.01%) 300mV
Output Level (1 kHz) Tape rec1, 2 (Pin) : 150mV/47k Ω
Pre out : 1V/47k Ω
Max Pre-out : 10V/47k Ω (THD 0.05%)
Output Impedance (1 kHz) Tape rec1, 2 (Pin) : 600 Ω or less
Pre-out : 75 Ω or less
Total harmonic distortion rate (20 Hz to 20 kHz) 0.01% or Less (at 1 V Output)
0.1% or Less (at 10 v Output)
Intermodulation distortion factor (70 hz : 7 khz = 4 : 1) 0.01% or Less (at 1 V Output)
0.1% or Less (at 10 v Output)
Frequency characteristic 5 Hz to 50 kHz + 0 -1dB
RIAA deviation ± 0.2 dB (20 Hz to 20 kHz)
Signal-to-noise ratio (IHF, A-network, short circuit) Phono1 and 2 : 77 dB or more
Aux, Tuner, Tape play1, 2 : 100 dB or more
Channel Separation (1 kHz, Input Short) Phono1, 2 : 60 dB or more
Aux, Tuner, Tape play1, 2 : 65 dB or higher
Input Separation (1 kHz, Input Short) Phono1, 2-Tuner : 90 dB or more
Phono1, 2-Tape play1, 2 : 90 dB or more
Tape play1, 2-Tuner : 90 dB or more
Tape play1 - Taple play2 : 100 dB or more
Tone control Bass : ± 10 dB (50 Hz)
Treble : ± 10 dB (15 kHz)
Subsonic filter 16 Hz (-3dB, 6dB/oct.)
Loudness (Volume -30dB) + 10 dB (50 Hz), + 7 dB (10 kHz)